Customization: | Available |
---|---|
Application: | Machinery&Hardware |
Type: | Roll Slitter |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Configuration list
Machine name: DP-750 slitting machine
1. Technical parameters | |
Machine speed: | 70m/min |
Maximum width of raw material: | 750mm |
Unwinding diameter: | 600 mm |
Rewinding diameter: | 600mm |
Slitting accuracy: | ±0.1mm |
Voltage: | 380V 50HZ |
Host power: | 2.2KW |
Total power: | 3.5KW |
Maximum aperture of raw material: | 3″ |
Compressed air source: | (0.4-0.6) Mpa (customer provided) |
Minimum width of standard slitting product: | 25MM |
Host size: | 3000*1700*1600 |
Weight: | 2T |
2, Unwinding components | |
Unwinding air shaft (standard 3 inch air shaft) | 1 set |
Magnetic powder brake 50 N (Shengda) | 1 set |
Unwinding tension control system | 1 set |
EPC SYSTEM ( web alignment ) | 1 set |
linear guides ( HIWIN) | 4 sets |
Encoder meter wheel | 1 set |
3. Pulling and cutting components | |
upper material steel roller (φ100) | 1 piece |
Drawdown rubber roller (PUφ150) | 1 piece |
Upper round knife shaft φ65 (upper knife φ110*75*1) | 1 set |
Lower round knife shaft φ65 (lower knife φ90*65*10) | 1 set |
Manual fine-tuning locking device | 1 set |
4. Rewinding components | |
Rewinding air shaft (standard 3-inch air shaft) | 2 sets |
magnetic powder clutch 50N (Shengda) | 2 sets |
Rewinding tension control system (Shengda) | 2 sets |
Main motor (Shanghai) | 1 set |
Main motor inverter (Weichuang) | 1 set |
Pneumatic up and down device for winding shaft (up, down, support) | 1 set |
safety chucks | 2 sets |
5. Receiving waste components | |
inflatable shaft for waste collection (standard 3 inches) | 1 set |
Magnetic powder clutch 25N (Shengda) | 1 set |
Rewinding tension control system (Shengda) | 1 set |
Rewinding motor (chaogang) | 1 set |
6. Edge trimming components | |
Trimming shaft | 2 sets |
Magnetic powder clutch 12N (Shengda) | 2 sets |
Rewinding tension control system (Shengda) | 2 sets |
Rewinding motor (chaogang) | 2 sets |
Edge parts traverse roller | 1 set |
7. Switchboard control box | 1 set |
8, Slitting part | |
Slitting up cutter | 10 sets |
Slitting down cutter | 10 sets |
Cutter seat | 10 sets |
Introduction to the main functions of this machine
For conventional slitting and rewinding of coil material, this machine frequency conversion speed regulation, easier operation and more precise control.
The tension of the double-rewinding magnetic powder is controlled independently, and it can be rewinded at the same time or used alone.
The electronic meter counter has automatic meter setting length, automatic stop, tolerance ±0.15M
Basic Specification |
Substrate Web Width Slitting Method Machine Speed Main Driving Motor |
Film, Paper, bop, polyester, poly aluminum foil etc. 20" to 100" etc. Razor Blade & Circular Knife Max. 300 M / Min. (Depending on Material) Variable Speed A.C. or D.C. Motor |
Unwinder |
Real. Dia Tension Control Edge Guide |
Max. 800 m.m. approx By Powder brake or A.C. or D.C. Motor or Manual Automatic Control |
Rewinder |
Real Dia Tension Control Slitting Width |
Max. 800 m.m. approx By Powder Clutch Or A.C. or D.C. Motor Or manual From 10 m.m. |